Insulated Glass Units

Advances in glass technology have contributed greatly to energy efficiency as well as comfort levels. Temperatures vary considerably between day and night, and from season to season. The greater the temperature difference between inside and outside, the greater the heat flow. Heat travels relatively easily through ordinary glass. In winter from inside to outside, and in summer from outside towards cooler air inside. This process can be slowed with insulation.

Double Glazing

The incorporation of Insulated Glass Units (double glazing) into windows and glazing is an established approach to improving the thermal insulation performance. Double glazing can be considered for both cooler climates as well as warm environments to provide improved comfort and more efficient use of energy.

Comfort

Insulated Glass Units provide an opportunity to tailor performance to needs, or to comply with specific project requirements. Insulated Glass Units can be manufactured with multiple choice of glass using clear, toned, high performance, laminated or toughened glass and with spacer bars of varying widths.

 

Warmer in Winter

Windows play a significant role in the energy required for heating and cooling. In a typically well insulated building with standard clear single glazing, up to 49% of heat is lost in winter through the windows. The use of Insulated Glass Units allows greater control of how much heat escapes through the windows in winter. By cutting the temperature transfer from warm (inside) to cold (outside), Chevron Insulated Glass Units can significantly reduce the loss of warmth in cold weather.

insulated-winter

Cooler in Summer

Heat gain through the glass depends on many factors such as any shading, the elevation, glass type, thickness and temperature. In a typically well insulated building with standard clear single glazing, windows allow the transfer of up to 84% of solar heat gain in summer. By reducing the temperature transfer from hot air (outside) to cooler air (inside), Insulated Glass Units can create a noticeably cooler environment in summer.

insulated-summer

 

Noise Reduction

Properly selected and installed, Chevron Insulated Glass Units can reduce noise by up to 65% compared to ordinary glass. Chevron Insulated Glass Units can be designed to reduce unwanted noise. Noise can vary, so the selection of an appropriate Insulated Glass Unit may vary to improve the noise reduction. For example:

  • maximizing the width of the air space
  • using glass of different thicknesses
  • Incorporating laminated glass in one or both panes

It is important to note that no matter how effective the noise reduction of the Insulated Glass Unit, entry points for noise such as gaps in and around the window frame, walls, ceilings, vents, loose fitting doors and floors also need to be properly sealed.

Installation

Insulated Glass Units must be properly installed in accordance with AS/NZS 4666, (see below). It is essential to seek advice from the material suppliers/ manufacturers that the type of glazing compound, sealant or gaskets is compatible and suitable for the chosen glazing system. When Insulated Glass Units are specified for structural glazing (i.e. structural silicone as the secondary seal), it is the installer’s responsibility to ensure that the glass types and all other components to be used (such as setting blocks, backer rods, structural silicone and glazing compounds) are compatible with the structural silicone used to seal the Insulated Glass Units. It is essential that this is checked with the material suppliers/manufacturers for compatibility and suitability for each project.

AS/NZS 4666 – Insulated Glass Units This standard sets out the performance requirements and guidelines on the selection and installation of Insulated Glass Units.

 

Terminology

Understanding terminology relating to thermal transmittance (U-Value) and solar heat gain coefficient (SHGC) are important in selecting glazing that will keep your home or office warm in winter and cool in summer.

U-Value

Is a measure of the rate of conductive heat transfer or insulation between indoors and outdoors, through the glass as a result of temperature difference inside and outside. The U-Value is dependent on the configuration of the unit, which includes the glass type, thickness and spacer bar width. As the U-Value decreases so does the amount of heat that is transferred through the glass. The lower the U-Value, the better the insulation.

Solar Heat Gain Coefficient (SHGC)

Is the proportion of directly transmitted and absorbed solar energy that enters the building’s interior. It includes direct solar transmittance plus indirect heat gain from re-radiation (conduction) of absorbed heat from the glass. The lower the number, the less the heat gain and better solar control.

Low E Glass

Glass products with a Low E coating are useful for reducing solar heat gain and loss. The Low E coating incorporated into the glass reduces the emissivity (rate of emission of absorbed heat) of the glass surface, thereby providing greater insulation.

Frame Design

Our Insulated Glass Unit Warranty requires that frames are designed in accordance with AS/NZS 4666.
Frames can be timber, aluminum, uPVC, or steel. It is essential to ensure the edges of Insulated Glass Units do not come into contact with or be allowed to remain in contact with water, as this can cause premature seal failure and/or delamination. Chevron Glass requires impervious weather seals and/or an adequate weep or drain system to prevent this from occurring.

 

To obtain a free no obligation quote call: (08) 8271 0111

Contact Us

Copyright © 2017 B and M Glass

Site by Secure eHost | Site Map

   

REQUEST A QUOTE

Top